Directions:
# Beads Needed:
Peach - 34
Blush - 39
Rust - 99
Kiwi Lime - 229
Dark Green - 182
Pastel Blue - 481
Light Blue - 446
Dark Blue - 361
Tan - 73
Light Brown - 133
Grey - 398
Black - 337
White - 552
You will need a total of 4 large square pegboards for this project. Purchase 2 packages of large square pegboards (each is a set of 2) to give you 4 boards.
1. Download the Kitten in the Covers Project Sheet. Assemble the FOUR large square pegboards as shown. Cut out the individual quadrants of the chart and tape them together so that you can see the whole design at once. If you are using clear pegboards, slide the actual-size pattern underneath them. Now, place all the beads for the design.
2. Cover the completed design with the ironing paper. Keeping the iron level, gently iron the beads in a circular motion for about 10 seconds to fuse the beads evenly. Ironed properly, the beads will still have an open center. Warning: Parents—the ironing must be done by an adult only. Some irons may emit steam. Please keep children at a safe distance.
3. Once the design is cool, peel off the ironing paper. Lift your design from the pegboard; flip the design over and repeat step #2. Your pegboard and ironing paper are reusable.