Directions:
# Beads Needed:
Light Pink - 80
Bubblegum - 85
Magenta - 98
Red - 296
Orange - 16
Pastel Yellow - 58
Yellow - 53
Pastel Green - 55
Light Green - 164
Toothpaste - 105
Turquoise - 16
Light Brown - 1294
Pearl - 568
Black - 168
White - 1054
NOTE: You will need 2 bags each of Light Brown and White beads.
1. Use the large square, small hexagon, and small heart pegboards for your project. If you’re using a clear pegboard, slide the actual-size pattern underneath it. Place all the beads for the design.
2. ?Cover the completed design with the ironing paper. Keeping the iron level, gently iron the beads in a circular motion for about 10 seconds to fuse the beads evenly. Ironed properly, the beads will still have an open center. On a 3-D project such as this, DO NOT OVER-IRON the beads as it will make the centers of the beads close and can make assembly difficult. Warning: Parents—the ironing must be done by an adult only. Some irons may emit steam. Please keep children at a safe distance.
3. Once the design is cool, peel off the ironing paper. Lift your design from the pegboard; flip the design over and repeat step #2. Your pegboards and ironing paper are reusable.
4. Assemble your house by aligning the tabs and spaces on the house front, back, and sides at right angles to each other. The roof, chimney, and fence go together in the same way. You may want to use craft glue to secure the pieces.
Glue the holly outside each window. We put a piece of cotton in the chimney to look like smoke. Place the lollipop fence as desired. You can create a winter scene with artificial snow and a painted backdrop for a festive look!