3-D Carousel

Directions:

# Beads Needed:
Hot Coral - 5
Red - 66
Pastel Yellow - 51
Yellow - 36
Cheddar - 240
Kiwi Lime - 6
Dark Green - 8
Light Blue - 1
Pastel Lavender - 5
Purple - 8
Creme - 757
Tan - 74
Light Brown - 25
Brown - 35
Grey - 65
Black - 67
White - 56

1. Download the name 3-D Carousel Project Pattern. Use the large circle and small square pegboards for your project. If you’re using a clear pegboard, slide the actual-size pattern underneath it. Place all the beads for the design.

2. Cover the completed design with the ironing paper. Keeping the iron level, gently iron the beads in a circular motion for about 10 seconds to fuse the beads evenly. Ironed properly, the beads will still have an open center. Warning: Parents—the ironing must be done by an adult only. Some irons may emit steam. Please keep children at a safe distance.

3. Once the design is cool, peel off the ironing paper. Lift your design from the pegboard; flip the design over and repeat step #2. Your pegboards and ironing paper are reusable.

4. Glue the three layers of the top together as shown. Stand the finial up, then glue it to the center of the assembled top.



5. Glue the two layers of the base together.



6. Add glue to horses’ posts at the bottom and top. Space the carousel horses evenly around the assembled base and adhere. Position the assembled top piece and adhere.