Skip to content


Directions:

  1. String a 6mm Bicone onto an Eye pin, trim to ¼” and make a loop with Needle Nose pliers. Attach one end to an ear wire. Repeat this whole step for other ear wire.
  2. String a 4mm Bicone onto a Head pin and make a small loop on the very top. Repeat 3 more times.
  3. Attach a long Eye pin to two 4mm dangles. Open the other end of the Eye pin and thread through the tulip flower and brass flute. Make a loop at the top and connect to the 6mm Bicone with Ear wire.

TIP: When creating the 4mm dangles, cut the top of on one a small amount to vary the lengths. 

Shopping List


Other Supplies

Supplies:

  • Needle Nose pliers
  • Chain Nose pliers
  • Flush cutters

You are now leaving the site.