1 Taking a scrap of Cream cardstock (we used cardstock with a flocked texture), cut it down till it measures approximately 4 3/4” x 2 3/4”. Fold in half.
2 From the Glad Tidings designer paper, take a sheet of paper with reindeers on it. Trim around a reindeer so that it fits onto your cream card. (Note: You can always take a larger piece of cream card and attach your design and then trim around the design!)
3 Using the 2 Way Glue pen apply glitter to the card on the holly, poinsettia, & reindeer.
4 Your gift tag can either be attached by using double sided tape or by punching a hole in the back of the card and threading ribbon through it.
Card with Pocket:
1 For this Holiday Gift, we are going to create a Gift Card Holder.
2 Taking a sheet of 8 1/2” x 11” Cream card, cut it in half. Fold the card in half so that you create a 4 1/4” x 5 1/2” card.
3 From the Glad Tidings designer paper, take a sheet of paper with the reindeers on it.
4 Cut a piece of the burgundy that measures 4 1/4” x 5 1/2” and attach it to the main card.
5 Cut a strip of the designer paper that has the Reindeer and the decorative border on it. (Refer to the picture for more information). The strip needs to be 5 1/2” wide. Attach to the card.
6 Using the Zig Glue pen apply glitter to the card on the holly, poinsettia, fir cones and Reindeer.
7. For the inside of the card, cut a strip of cream card measuring 2” x 5 1/2”. Cut a strip of the decorative paper which has the holly and poinsettia on it to fit along the top of the cream strip. Glue one strip onto the other. Using a very fine line of glue, attach to the inside of the card creating a pocket.
8 Slip the gift card inside the pocket and you have it!